Proxies for ZennoPoster

Build your proxy plan.

Build a plan around your exact workload. Choose the proxy type, locations, IP volume, billing term, and optional UDP support—the price updates instantly.

CountryNumber of IPs

UDP support

Off

Adds 50% to the base plan price. Works over SOCKS5 (UDP ASSOCIATE) — for gaming, VoIP, and streaming.

Four ways to buy proxies.
One fits this workload.

Every FineProxy address uses IPv4. Datacenter, dedicated, and ISP proxies remain static for the plan term; rotating proxies change with each request. Static plans include unmetered traffic. The highlighted option matches this page’s primary use case: Package datacenter.

	Recommended herePackage datacenterSold in blocks, shared	DedicatedPersonal, from a single IP	ISPStatic ISP-registered addresses	RotatingBilled in API credits
Best for	Bots and monitoring at volumeFor work without a persistent account.	Long-lived account sessionsOne address per profile, used only by you.	Targets that judge the ASNRegistered to an internet provider.	Collection, not accountsA persistent session should not change address.
People per address	Up to 5Reputation depends partly on your neighbours.	1 — youNobody else uses it for the whole term.	Up to 5	Shared pool
Platform trust	StandardDatacenter ASN	High — exclusive	High — ISP registered	Varies by pool
Price from	$12 / 100 IPs$0.12 per address, monthly	$12 / 100 IPsBuy exactly what you need.	$30 / 100 IPs$0.30 per address, monthly	$35 / Rotating Proxies 2.5M Credits
Minimum order	100 IPs	1 IP	100 IPs	2.5M credits
Address tenure	Static for the term	Static for the term	Static for the term	Changes per request
Bandwidth	Unmetered	Unmetered	Unmetered	CreditsBilled per request, not per gigabyte.
UDP / voice calls	Optional add-on	Optional add-on	Optional add-on	Not available
Protocols	HTTP, HTTPS, SOCKS4, SOCKS5	HTTP, HTTPS, SOCKS4, SOCKS5	HTTP, HTTPS, SOCKS4, SOCKS5	HTTP, SOCKS5
Authentication	IP allowlistLogin and password can be added.	IP allowlistLogin and password can be added.	IP allowlistLogin and password can be added.	API key
	See plans	See dedicated plans	See ISP plans	See plans

Recommended here

Package datacenter

Sold in blocks, shared

Best for

Bots and monitoring at volumeFor work without a persistent account.

People per address

Up to 5Reputation depends partly on your neighbours.

Platform trust

StandardDatacenter ASN

Price from

$12 / 100 IPs$0.12 per address, monthly

Minimum order

100 IPs

Address tenure

Static for the term

Bandwidth

Unmetered

UDP / voice calls

Optional add-on

Protocols

HTTP, HTTPS, SOCKS4, SOCKS5

Authentication

IP allowlistLogin and password can be added.

See plans

Dedicated

Personal, from a single IP

Best for

Long-lived account sessionsOne address per profile, used only by you.

People per address

1 — youNobody else uses it for the whole term.

Platform trust

High — exclusive

Price from

$12 / 100 IPsBuy exactly what you need.

Minimum order

1 IP

Address tenure

Static for the term

Bandwidth

Unmetered

UDP / voice calls

Optional add-on

Protocols

HTTP, HTTPS, SOCKS4, SOCKS5

Authentication

IP allowlistLogin and password can be added.

See dedicated plans

ISP

Static ISP-registered addresses

Best for

Targets that judge the ASNRegistered to an internet provider.

People per address

Up to 5

Platform trust

High — ISP registered

Price from

$30 / 100 IPs$0.30 per address, monthly

Minimum order

100 IPs

Address tenure

Static for the term

Bandwidth

Unmetered

UDP / voice calls

Optional add-on

Protocols

HTTP, HTTPS, SOCKS4, SOCKS5

Authentication

IP allowlistLogin and password can be added.

See ISP plans

Rotating

Billed in API credits

Best for

Collection, not accountsA persistent session should not change address.

People per address

Shared pool

Platform trust

Varies by pool

Price from

$35 / Rotating Proxies 2.5M Credits

Minimum order

2.5M credits

Address tenure

Changes per request

Bandwidth

CreditsBilled per request, not per gigabyte.

UDP / voice calls

Not available

Protocols

HTTP, SOCKS5

Authentication

API key

See plans

Proxies for 48 hours

Build a plan for your task and test the proxies in real work. Pay for the selected configuration for 48 hours—the price is calculated during setup.

Proxies for 48 hours

Top Proxy Locations

The eight proxy locations FineProxy customers choose most often.

View all locations

Connect once.
Then just ask.

FineProxy runs a native MCP server: paste one URL into your agent and it gets 49 cabinet tools — buying, renewals, IP rotation, allowlists, usage analytics, invoices, and support. The same operations are available through a REST API if you would rather write the calls yourself.

Then just say

Buy 1,000 datacenter IPs for a multi-threaded ZennoPoster project
Allowlist 203.0.113.7 for my proxy service
Export my proxy lists as JSON
Show which services had the highest error rate today
Renew every proxy service expiring this week

Learn more →Create an API key →

~/.claude/claude_desktop_config.json

{
  "mcpServers": {
    "fineproxy": {
      "url": "https://fineproxy.org/account_new/api/v1/mcp",
      "headers": {
        "Authorization": "Bearer fb_live_••••"
      }
    }
  }
}

Restart Claude after saving the configuration. FineProxy’s 49 tools will then appear in the available tool list.

What the agent won’t do — whatever you ask

Spend your money

Six tools touch the balance and all six need wallet:spend. Leave it off the key and the agent can run everything else.

Pay more than quoted

Every purchase carries expected_total_cents from the quote. A cent of drift and the call is rejected, with nothing charged.

Cancel on a whim

The two irreversible tools refuse to run without confirm=true. Termination cannot happen as a side effect.

Charge you twice

Money calls take an idempotency_key. A retry after a timeout settles the same charge, not a second one.

MCP: 49 tools · 9 permission scopesJSON-RPC 2.0 · Streamable HTTP · statelessREST API: 49 operations · OpenAPI 3.1

Manual setup

Choose your operating system, browser, or proxy application for a step-by-step setup guide.

ALL INTEGRATIONS

Systems

Browsers

Apps

Built for speed.
Traffic never metered.

FineProxy sustained up to 500 Mbps in our standard remote-server tests. In scraping workloads, the target site’s rate limit—not the proxy—was usually the ceiling.

Test method: 1,973,500 connection attempts plus concurrency runs of up to 96 threads through one proxy IP.

500 Mbps

per proxy in standard remote-server tests

99.97%

of connections established across 1,973,500 requests

concurrent threads on one IP with no degradation

bandwidth caps — unlimited traffic on every plan

Dedicated AMD EPYC

Our own servers, with no shared-VPS neighbours competing for the port.

Own subnets

IPs come from ranges we hold ourselves, not resold from another provider.

80 Gbps uplink

Capacity headroom per server—not a promise for a single proxy session.

Tier III / IV

Data centres with redundant power and cooling across our locations.

Test notes

Actual throughput depends on the route, destination, network conditions, and the configuration and performance of the user’s equipment. A laptop on a 500 Mbps home internet connection reached approximately 468 Mbps in practice, while remote servers reached up to 500 Mbps in standard tests. In exceptional tests from properly configured high-performance servers in Europe and the US, throughput reached up to 700 Mbps; this is not a typical per-session result.

Every claim on this page, in someone else’s words.

Relevant customer feedback, selected from one verified review pool and linked back to its original source.

2011serving proxies since

Running accounts

I work with this service for over a year and always everything is fine, no bans or disagreements! Easy to use, no unnecessary features, is all that is needed. I do it in the shower! I found no flaws in this proxy.

Anton SmirnovFineProxy internal platformSource

I've been used it for 5+ years and this is a great proxies to work with data scraping/social networks and any other automation projects - fast rotating IPs, almost all proxies are not blocked like in other providers etc. also customer support is quite good.

synk.pitNorton Safe Web, Last yearSource

API and agent access

Fast and reliable proxy service with excellent uptime, great support, and affordable pricing. Perfect for secure browsing and automation tasks!

MargaretSaasHub, Last yearSource

i love fineproxy the speed is great i use it on automation tools, webscrapping and for browsing, the connection are stable and the speed is very good, never disconnect and not banned ips, i will buy it again and again, the support team is really great response on time

7heGoatCR7Dieg, Last yearSource

Traffic never metered

Affordable EU proxies. The only proxy provider that still keeps their prices low. Was looking all across the Internet for something like this and it turned out to be the cheapest proxy provider with unlimited bandwidth.

Wowser BrowserTrustpilot, This yearSource

I will not say that the prices are the lowest, but unlimited traffic and maximum speed is undeniable. The support service did not fail me personally – always in touch, always topical, polite and without fuss. I use the package for 30 days, European addresses, for the second year already. After payment, everything happens instantly. I did not try to mix, it’s enough for me.

Юрий ЮрийFineProxy internal platformSource

Which proxies work best for ZennoPoster — HTTP or SOCKS5?Depends on scenario

For pure web scenarios, HTTP is sufficient. If you need neutral transport and remote DNS resolution, choose SOCKS5. Both types work correctly in ZennoPoster and ProjectMaker.

Where do you set proxies and how do you distribute them across threads?Use ProxyChecker

Import your list into ProxyChecker/Proxy Panel (formats: ip:port, ip:port:login:pass, or IP binding access). In your project, add the Use Proxy action at the very beginning of the workflow.

How do you avoid overlaps and quickly exclude bad addresses?Queue and blacklist

Store the list in resources (LinesFromFile/URL), enable pre-checking (HEAD/small GET) through ProxyChecker, maintain a blacklist of IPs, and use rotation by queue. Use separate lists for different domains/tasks.

Why do I still see captchas/403s even with proxies, and how can I reduce them?Match session signals

It’s not only about the IP: keep cookies/sessions, use consistent User-Agent/Accept-Language/Time-Zone, add pauses and backoff, avoid hammering logins and forms in parallel. Split domains across different proxy pools.

By Protocol

Payment

By Feature

48-hour proxies

Europe

Americas

Asia & Australia

Africa

Social & Messaging

Media & Streaming

Shopping & Finance

Other

Company

Learn

Developers

Legal

Package datacenter

Dedicated

ISP

Rotating

Proxies for 48 hours

Connect once.Then just ask.

What the agent won’t do — whatever you ask

Spend your money

Pay more than quoted

Cancel on a whim

Charge you twice

Systems

Browsers

Apps

Dedicated AMD EPYC

Own subnets

80 Gbps uplink

Tier III / IV

Running accounts

API and agent access

Traffic never metered

Connect once.
Then just ask.